Grades: Brass (CuZn5; CuZn10; CuZn15; CuZn20; CuZn30; CuZn33; CuZn35; CuZn36; CuZn37) Brass with Nikel (CuZn25Ni5; CuZn25Ni2; CuZn18Ni2) Tin Brass (CuSn1Zn12; CuSn2Zn10; CuSn3Zn9) Leaded Brass (CuZn38Pb1,5; CuZn39Pb2) New Silver (CuNi12Zn24; CuNi15Zn20; CuNi18Zn17; CuNi18Zn20; CuNi12Zn29; CuNi18Zn27) Cooper Nikel (CuNi9Sn2; CuNi16; CuNi25) Leaded New Silver (CuNi8Zn25Pb2; CuNi12Zn25Pb1) Phosphor Bronze (CuSn4; CuSn5; CuSn6; CuSn8) Multicomponent Bronze (CuSn4Zn4Pb4; CuSn4Zn4Pb2,5) Aluminium[...]

BRASS RODS AND BARS CONFORMITY WITH STANDARDS: - brass rods are manufactured acc. to PN, EN, ASTM, DIN, GOST, JIS. - or according to customer\'s specification. FORM: drawn, extruded - round, - square, - hexagonal rods - bars STRAIGHT LENGTHS - Round, hexagonal and square drawn rods: length 2000 - 5000 mm (soft temper max. 3000 mm) - Drawn bars: length 2000 - 6000 mm (soft temper max. 3000 mm) - Extruded rods: length 1000 - 5000 mm COILS - Round rods Ø 2 -10 mm: coil I/D = ca.[...]

Aluminium profiles grade: PA38 CHEMICAL COMPOSITION: Aluminium alloy PA38: Mg - 0,4 - 0,9 % Si - 0,3 - 0,7 % Al- rem. Impurities: acc. to PN- 79/H-88026 PRODUCT LINE: PROFILES WITH SIMPLE CROSS-SECTION: - equal and unequal angles, - equal and unequal tee-bars, - channel sections. PROFILES WITH COMPLEX CROSS-SECTION (acc. to existing drawings or as agreed with a customer) - solid, - half-closed TECHNICAL PARAMETERS: - Cross-section within a circle up to dia. 80 mm, - Min.[...]

Brass profiles grade: MA56 CHEMICAL COMPOSITION: Brass MA56: Cu - 56,0 - 59,0% Pb -1,0 - 3,0% Al - 0,3 - 1,0% Zn - rem. Total impurities: max. 1,8 % PRODUCT LlNE: PROFILES WITH OPEN CROSS-SECTION: - simple: equal and unequal angles, - complex: acc. to existing drawings or as agreed with a customer. TECHNICAL PARAMETERS: - Cross-section within a circle up to dia. 80 mm, - Max. cross-section area ca. 1000 mm2, - Min. wall thickness 1,2 mm, - Max. length 4000 mm. MECHANICAL[...]

BRASS TUBES FOR HEAT EXCHANGERS GRADES: CuZn20A12, CuZn28Sn1, CuZn30As acc. to PN-92/H-87025 CONFORMITY WITH STANDARDS: Tubes are manufactured acc. to PN-80/H-74585, EN 12451, DIN 1785, BS 2871, ASTM B111, ASME SB111, GOST 15527-70, NF A51-102, JIS H3300 DIMENSIONAL RANGES: Outside diameter [mm] Wall thickness [mm] 9,5 – 22 0,80 – 0,99 10 – 35 1,00 – 1,49 11 – 45 1,50 – 2,00 15 – 45 2,01 – 2,50 25 – 45 2,51[...]